Now you can run mixed trains of Hornby and JeP!!

Our adaptor coupling is designed to mount under a Hornby van or wagon to enable it to couple to JeP rolling stock. It is very simply fitted and the modification is completely reversible.

Please note that this adaptor is not suitable for bogie vehicles.


All you have to do -

1) - remove the eyelet and coupling from the Hornby wagon

2) - put the adaptor coupling in place. The tail goes above the axle, the metal tongue through the coupling slot, run in the screw - job done!


Hornby-JeP Adaptor Coupling - 4.75

You will need a 2.5mm hex key ('Allen key').

If you don’t already have one - 1.00 each